• 0


Hydraulic 2-post lift with universal arms


Item No:HLNT250.0001110D-5001
2 post lift POWER LIFT HL 2 50 NT blau
Brief description
Item No: HLNT250.0001110D-5001
Lifting capacity: 5000 kg
Type 2 post lift
Color Blue


The hydraulic 2-post lift Power Lift HL 5000 NT Universal with a load capacity of 5000 kg and symmetrical universal arms, the ideal lift for the demanding automotive workshop that serves all vehicle types, from short compact cars to heavy SUVs to vans and vans with long wheelbases. With the very fast lifting and lowering times for it's weight class as well as a minimal maintenance effort (no synchronization ropes, no pulleys, no ratchet) it is the ideal lift for daily continuous use in a car repair shop where flexibility and reactivity are in demand. With the universal arms consisting of four double telescopic arms you can lift a wide range of vehicle sizes and weight classes from Smart to Mercedes Sprinter and VW Crafter with long wheelbase.

The Power Lift HL 5000 NT Universal is equipped as standard with the patented Nussbaum NT and HyperFlow® technologies and has been developed and manufactured by Nussbaum since its ; market launch in 2014 in Kehl-Bodersweier in Baden-Württemberg .

  • Lifting time: 31 seconds / Lowering time [AttributeShortCode,attribute=Lowering time,attributeid=62] seconds
  • Load capacity: 5000 kg
  • Universal arms reach the mounting points of a wide range of vehicle sizes
  • Adjustable in width and height (with optional riser pipe extension)
  • Compressed air connection and 220 V socket integrated in column
  • High quality: Every power unit and every hydraulic cylinder is tested before shipment
  • Developed and manufactured in Germany
  • Recommended by Mercedes-Benz (for similar lift HL 2.50 NT Universal MB)

The HL NT series is the result of over 40 years of experience in the manufacture and development of high-quality automotive lifts Made in Germany. With specially developed, in-house technologies, we are the only lift manufacturer in the world that can provide you with a precise, variable lowering speed and an always perfect synchronisation without manual maintenance effort anbieten. The ergonomic stepless operating lever Nussbaum-Commander enables sensitive lowering and allows the user to change and correct positions in no time at all, all with maximum safety. The Power Lift HL 5000 NT Universal is not only safe, but also exceptionally flexible and can be adapted to a wide range of workshop sizes and configurations.Their base frame-free design, adjustable in width and height, enables a wide range of installation combinations and variants:  Mit a minimum height of 4020  mm and a maximum height of 4880 mm thanks to the optional riser pipe extensions the Power Lift HL 5000 NT Universal can be used both in workshops with low ceiling heights and to lift the underbody of high vehicles such as vans and vans to the ideal working height for you.

The pulling hydraulic cylinders protect the hydraulic circuit even during intensive use and require very little energy. The low power consumption, the consistent automatic compensation of the hydraulic circuits by the HyperFlow® system and low maintenance costs, also thanks to the reduced number of moving parts, reduce running costs. The suboil unit is mounted on the operating column and easily accessible for maintenance work. A compressed air connection and a 220 V socket are integrated in the control column. The arms and columns are welded in Nussbaum's own state-of-the-art welding facilities, shot-peened and subsequently azul powder-coated. Your lift is thus protected against dirt and weather in the long term.

The design and the processing of the Power Lift HL 5000 NT Universal give it an elegant overall appearance, which also allows your workshop to appear in the best light in direct customer contact.


Hebebühne mit Unterölaggregat an der Hubsäule, Steuerung mittels Commander Hebel, Hubsäulenverlängerung variabel einstellbar, Universal bzw. Doppelgelenktragarme, im Tragarm gesteckte Teleskopdrehteller, CE-STOP bei DG Ausführung

Installation services

Fundamentstärke von min. 250mm mit Qualität min. C20/25, 14 Dübel BM16-25/100/40 (abhängig vom Fundament, siehe Prüfbuch), Elektroanschluss 3 PH, N + PE, 400 V, 50 Hz, Absicherung 16 Amp. träge, Hydrauliköl HLP 32 ca. 10l[newline marker]Entladung

Capacity 5000 kg
RAL color RAL 5001 - Blue
Coating Powder coating
Recommended installation width 3750 mm
Required ceiling height 4200 mm
Pick up pad height min 130 mm
Pick up pad height max 205 mm
Pick up pad height min 130 - 205 mm
Min length front arm 860 - 1850 mm
CE-Stop ja
Lifting height max. 2067 mm
Clear distance between columns min 2977 - 3177 mm
Synchronization system
Column height 4020 mm
Installation width min. 3650 - 3850 mm
Total width min 3925 - 4450 mm
Lifting time 31 sec
Lowering time 15 sec
Clearance height min 3963 - 4824 mm
Drive-through width min 2690 - 2890 mm
Drive-through width column min 2977 - 3177 mm
Drive-through width lifting carriage min 2690 - 2890 mm
Total height min 4020 - 4880 mm
Pick up device
Oil quantity (approx.) 10 liter
Electrical connection (Ph/V/Hz) 3 Ph , 400 V , 50 Hz
Engine power 3 KW
Fuse protection
Foundation length 1650 mm
Foundation width 4300 mm
Concrete thickness 250 mm
Concrete quality C20/25
Noise level (<=) 70 db
Customs tariff number 84254100

Product Dimensions 4300mm x 1200mm x 900mm
Total weight 1470kg
Stackable Not stackable
Ball knob for striking GN 319-KT-32-B10-M Item No: 970233
Bolt Rd. 10x22 S355J2G3 (galvanized 5-15µm) Item No: 9025ALSM08039
Check valve RVE06 S 2 bar Installation: G1/4 Item No: 983700
Circuit breaker A 105/3.0200-EV-SO Item No: 990403
Contactor DC24V / 5,7KW / 400V [27] Item No: 990842
Coupling socket with female thread Item No: 960134
Cylinder Command side 1854 mm Stroke Complete Item No: 230HL22301
Cylinder Next page 1854 mm Stroke Complete Item No: 230HL22351
Elastomer support Drm. 125x24 mm Item No: 901103031
Energy set plastic 70X50X150 Item No: 9225SL05093
Flat plug-in housing 6-fold for mounting Item No: 990330
Flat receptacles type F 6.3mm bare (B 638F) Item No: 990329
Fuse holder for E-Set incl. fine fuse 5x20 mm 6,3A Item No: 9232SL393024
gear pump 1BK7S4,2 Q 2,7 cm³ Item No: 980340
Head protection Rd. 68x40 PA 6.6 black Item No: 9250HDL48028
Hood compl. Item No: 250HLNT09345-SM
Locking pin complete Item No: 250HDL48119
Locking pin Rd. 10x140 C15k (galvanized) Item No: 250HDL48120
Nozzle 15-010/L 10 RB A3C Item No: 980014
Piston guide ring GP6500500-T47-050x05,6x02,5x146,9 Item No: 980277
Pulling rod Schwt. Item No: 250HL06383
Push button 1115.0101 Item No: 990322
Recording plate Schwt. 2.50 HDL (galvanized) Item No: 250HDL28037
Schuko socket outlet blue 10/16A 230V IP54 Item No: 990646
Schutzkappe f.Ziehstange 10mm Item No: 970008
Submersible motor UO7K2-371 3,00 kW 3 Ph. 230/400V 50Hz 2pol. Item No: 992658
Telescopic bush Rd. 90x43 (Rd. 95)C45 (galvanized)-KANBAN- Item No: 250HDL28027
Telescopic support plate Item No: 235TTKAS08055
Telescopic threaded bush Rd. 56x80 C45K(galvanised)-KANBAN- Item No: 250HDL28031
Adjustable top set 115-220 mm, set = 4 pieces. Item No: 235TTKAS08501
Attachment set for MB 100, adjustable 150-255 mm, set = 4 pieces. Item No: 235TTKAS08537
Attachment set for Sprinter (NCV3) with fixing pin for front attachment points, adjustable 230-335 mm, set = 2 pieces. Item No: 235TTKAS08870
Attachment set for Sprinter (NCV3) with prism for rear mounting points, adjustable 225-330 mm, set = 2 pieces. Item No: 235TTKAS08850
Attachment set for transporter (Trapo) adjustable 150-230 mm, set = 4 pieces. Item No: 232SL08850
Drive-on plates / vehicle pedestal (1 set = 4 pieces) Raise the vehicle by 50 mm - ideal for lowered vehicles. Dimensions: 700x400x50 LxWxH ­ 8,5kg/panel Item No: 235HL05130SET
Holder for push-on fittings. For a set of 4 attachable sets 2 pieces are required. Item No: 232SL05424
Hose holder to screw onto the column, 1 piece. Item No: 175RG25315
Impact wrench holder for screwing onto the column, 1 piece. Item No: 225SL08278
Lifting column extension extendable up to 5200mm with suitable hydraulic line set Item No: 250HLNT05481TG
Retrofit kit for control system complete with lift height limitation by means of light barrier. Item No: 250HLNT01700
Slip-on set for MB off-road vehicle GW 460/ 463 with adjustable step 160-275 mm, set = 4 pieces. Item No: 235TTKAS08573
Support plate attachment for frame locking on off-road vehicles, set = 2 pieces. Item No: 232SL08840

Sign up to receive the Nussbaum Newsletter

Subscribe to our mailing list

* indicates required

NUSSBAUM GROUP verwendet die Informationen, die Sie in diesem Formular angeben, um mit Ihnen in Kontakt zu bleiben und um Produktupdates und auf Sie abgestimmtes Marketing bereitzustellen. Bitte lassen Sie uns wissen, was Sie von uns hören möchten:

Sie können Ihre Meinung jederzeit ändern, indem Sie in der Fußzeile einer E-Mail, die Sie von uns erhalten, auf den Link zum Abbestellen klicken oder uns unter hyperflow@nussbaum-group.de kontaktieren. Wir werden Ihre Informationen mit Respekt behandeln. Weitere Informationen zu unseren Datenschutzpraktiken finden Sie auf unserer Website. Indem Sie unten auf "Für Liste anmelden" klicken, stimmen Sie zu, dass wir Ihre Informationen in Übereinstimmung mit diesen Bedingungen verarbeiten dürfen.

We use Mailchimp as our marketing platform. By clicking below to subscribe, you acknowledge that your information will be transferred to Mailchimp for processing. Learn more about Mailchimp's privacy practices here.

© Otto Nußbaum GmbH & Co. KG - Alle Rechte vorbehalten.